Stainless Steel 304LN Lateral Tee Pipe Fittings

The Price Of Stainless Steel 304Ln Lateral Tee Pipe Fittings Products Is Between ₹100 - ₹150 Per Piece, We Have Pricing Based On The Kilogram As Well, Please Contact For The Same.

The Harmonized System of Nomenclature (HSN) code for stainless steel 304Ln lateral tee pipe fittings is 7307 23 00. This code is used to classify goods and track them when they are exported or imported.

To get started welding stainless steel pipe fittings, you'll need to have the following supplies: a welding machine, welding cloths, and flux core wire. Before you begin the welding process, be sure to completely clean the stainless steel surface with a mild detergent or non-metallic brush. This will help ensure that your weld is properly adhered to the material. Once your surface is prepped and ready, set up your welder according to manufacturer instructions and use flux core wire for maximum strength in your welds. Make sure that you're wearing safety equipment and goggles while welding, as it can become dangerous very quickly if proper precautions are not taken. Start by tacking each side of the fitting onto where it needs to be welded before tackling the entire piece. This will help ensure accuracy when tack-welding all around the pipe fitting. Once both ends are tacked together, start running a bead around the outside of the fitting at an angle of about 45 degrees before reversing direction for zigzag movements back around. Depending on how thick your materials are, try using lower amperage for thinner metals such as stainless steel 304Ln tubes and pipes, and higher amperage for heavier materials like elbows and tees. Once finished go back over your work with a grinder or emery paper if necessary to remove any spatter or blemishes from your weld site. Once complete, inspect everything one last time before considering your job done! Now you know how to weld stainless steel 304Ln lateral tee pipe fittings!